SENDFILE        Send one or more files

Top  Previous  Next

Syntax:

SENDFILE

[ file name ]  [ /options ]

 

SENDFILE

[ file name ] [ /as |  /ap ] [ new name ] [ /options ]

Arguments:

[ file name ]

Variable or string defining a file or path name; if no path is defined Robo-FTPs working folder is used; wildcard characters are permitted in the file name itself (not the path name portion) as long as the file name conforms to the 8.3 file naming convention.  Wildcards are not permitted when connected to a HTTP/HTTTPS site.

 

[ new name ]

Variable or string defining the name for [ file name ] on an FTP site; [ new name ] should be a file name only (no path is allowed); [ new name ] is only permitted immediately following the /as or /ap options.

Options:

/allowerrors

This option prevents SENDFILE from failing when doing a multi-file upload (i.e., using wildcards) when a local and/or FTP site file I/O error occurs (e.g., a file is read-only or file access is denied). The command continues and the total number of I/O errors are saved in the %uploaderrors variable.

 

/as

Specify a different file name on the FTP site for the file being sent; this option cannot be used with wildcard characters in [ file name ].

 

/ap

Append [ file name ] to [ new name ] on the FTP site system; if [ new file ] does not exist on the FTP site, it is automatically created; this option cannot be used with wildcard characters in either [ file name ] or [ new name ]; nor is the /resume or /resumeany or any of the /if… options permitted to be combined with this option. This option is permitted in normal (non-secure) FTP mode only. The /ap option differs from /append in that it requires the [ new name ] argument and allows [ file name ] to be appended to a file of a different name on the FTP site.

 

/append

Append [ file name ] to a file of the same name on the FTP server system; if the file does not exist on the FTP site, it is automatically created; this option cannot be used with wildcard characters in [ file name ]; nor is the /resume or /resumeany or any of the /if… options permitted to be combined with this option. This option is permitted in normal (non-secure) FTP mode only. The /append option differs from /ap in that it does not require the [ new name ] argument and [ file name ] is always appended to a file of a same name on the FTP site.

 

/archive

Move the file to the designated archive folder after a successful transmission.

 

/blocksize=xx

Change the maximum default block size used to read files from disk and the corresponding block size used for passing upload data to the Winsock API. The default value is 32,000 bytes. You may choose to increase or decrease this block size by way of experimentation to modify upload performance. The maximum block size is 819,200 bytes.

 

/delete

Delete [ file name ] after it has been successfully sent; local folders are not deleted.

 

/emptydirs

Normally SENDFILE with the /subdirs will not create directories on the the FTP site if there are no files in a corresponding local folder. You can alter this behavior and allow empty directories to be created by including this option. This option is permitted only with the /subdirs option.

 

/flat

Normally SENDFILE with the /subdirs option will duplicate all or part of the local PC folder structure on the FTP site as it transfers files it finds as it traverses local folders and subfolders. Specify this option if you wish all files found on the local PC to be written to the current directory on the FTP site. No new FTP site directories will be created. Beware that files found with duplicate names are overwritten.

 

/ifarchive

Only send local file(s) that have the archive (backup) file attribute set. This attribute is reset if the file(s) are sent to the FTP site successfully.

 

/iflarger

Do not overwrite the file on the FTP site if it is smaller than, or the same size as, the file being sent from the local PC.

 

/ifnewer

Do not overwrite the file on the FTP site if the file date and time is newer than, or the same as, the file being sent from the local PC.

 

/ifnotexist

Do not overwrite a file of the same name on the FTP site if it already exists.

 

/ifnsamesz

Do not overwrite a file of the same name on the FTP site if it already exists and it is exactly the same size as the file being sent from the local PC.

 

/integrity=xx

Use file integrity checking as the files are uploaded.

 

/localdate

When saving the server file, change the file’s last modified date to match the date and time of the corresponding local file.

 

/lower

Convert file or path name to lower case before saving it on the server.

 

/maxrate=xx

Specify the approximate maximum upload rate (in Kbps) to limit the bandwidth used by Robo-FTP when sending file(s). The rate specified here (if non-zero) overrides the default transfer rate that may have been specified when defining a site using the Robo-FTP configurator.

 

/nospaces

Replace space characters embedded in local file names with underscore characters before storing the file on the FTP site (for compatibility with FTP sites hosted on Unix servers) (see the /nounderscores option on the RCVFILE command).

 

/nostatus

Do not display send file status dialog box.

 

/resume

Attempt to restart a file transfer from the point of interruption;  use this option if the transfer of a large file fails and you wish to resume the transfer from the point of interruption rather than resending the entire file. This option cannot be used with any of the overwrite control options (e.g., /iflarger, /ifnotexist).

 

/resumeany

Same as /resume except the file transfer will restart from the beginning automatically if Robo-FTP determines that a broken transfer cannot be resumed from the point of failure.  This option cannot be used with any of the overwrite control options (e.g., /iflarger, /ifnotexist).

 

/serverdate

After sending a local file to the FTP site, change the local file’s last modified date to match the date and time of the corresponding file on the FTP site.

 

/subdirs

Descend into all folders beneath the current or specified local folder and send the files therein; the corresponding directory structure is created on the FTP site if it does not exist.

 

/timeout=xx

Time-out in seconds to wait for a send file operation to start; if xx is 0, Robo-FTP waits indefinitely.

 

/type=xx

The type of FTP file transfer to perform: ASCII, BIN, or EBCDIC; if this option is omitted, the default file transfer type set when the FTP site was defined is used; if the FTP site has not been previously defined, type BIN is used.

 

/tz=xx

Timezone adjustment (in hours) between the local PC and the FTP site; value is expressed as a positive or negative integer; used when local and server file’s time/date stamps are compared (use with the /ifnewer and /serverdate options). This value overrides and replaces the timezone adjustment set using the TIMEZONE script command.

 

/upper

Convert file / path name to upper case before saving it on the server.

 

 

When connecting to a HTTP/HTTPS site, only the following options are valid with the SENDFILE command: /allowerrors, /archive, /as, /delete, /lower, /nospaces, /timeout=xx, /upper

 

This script command uploads one or more files to an FTP site. Upon completion of the command, the %uploadcount script variable contains the total number of files uploaded and the %uploadsize script variable contains the size in bytes of the most recent file uploaded. If the /allowerrors option is specified, the count of any file I/O errors is recorded I the %uploaderrors variable

 

When uploading, the FTP site automatically creates a file with the same name as the original. This behavior may be modified. When the /as option is used, the uploaded file is saved using the specified name; when the /ap option is used with non-secure FTP sites the uploaded file is appended to an existing file of the same or a different name.

 

For example, the following command sends a file named “file name” from Robo-FTP’s current working folder to the current directory on the FTP site:

 

SENDFILE "file name"

 

When relative path names are specified, as in the following command, a file is sent from the specified local folder relative to the Robo-FTP current working folder and is stored in the current directory on the FTP site. In the following example, a file named "file name" is uploaded from a local folder named “localdir” relative to Robo-FTP’s current working folder and saved as "file name" in the current FTP site directory.

 

SENDFILE "localdir\file name"

 

Multiple files may be sent by using wildcard characters (*, ?) in the [ file name ]. Consider the following example in which all the files in a particular directory are sent to the FTP site.

 

SENDFILE "c:\My Data\*.*" /timeout=30

 

Important

Automatic transmission of multiple files may also be accomplished using the GETNEXTFILE command and a conditional looping structure within a script file.

 

The /archive option automatically moves a local file to an archive folder defined using the ARCHIVEDIR script command after it has been successfully sent. If a file by the same name exists in the archive folder, it is overwritten. Do not confuse this with the /ifarchive option which is used to send only local file(s) that have the archive (backup) file attribute set.

 

The /delete option automatically deletes a local file after it has been successfully sent. The /subdirs option may be used to send the entire contents of a local folder and all subfolders, and have a corresponding directory structure reproduced on the FTP site. In the following example, all files with an extension of .html  in the My Site folder and all subfolders are uploaded to the FTP site.

 

SENDFILE "c:\My Site\*.html" /subdirs

 

Consider the following example where all the files in a specified folder and all subfolders are uploaded and then deleted after being sent successfully.

 

SENDFILE "c:\My Data\*.*" /subdirs /delete

 

Important

For the /subdirs option to perform properly with wildcards, it is important that the contents of the local PC folder structure not change (i.e., new files added or files deleted) while the SENDFILE command is active.

 

Important

Relative path names are not permitted in the SENDFILE command when the  /subdirs option is present. For example, "c:\My Data\*.*" is permitted, but "My Data\*.*" is not.

 

The /emptydirs and /flat options modify the default behavior of SENDFILE with the /subdirs option. With /emptydirs, empty directories found on the local PC are not duplicated on the FTP site. With /flat, all files found in folders and subfolders on the local PC are written to the current directory on the FTP site.

 

The following example command results in a local file being sent and saved as a different file name on an FTP site.

 

SENDFILE "c:\My Data\test" /as "test001" /timeout=30

 

In non-secure (SSH or SSL) environments, there are two forms of the SENDFILE command that may be used to append to a file on an FTP site. The form using the /append option results in a file being appended to a file of the same name on the FTP site. The form using the /ap option may be used to append to a file with different name on the FTP site. If the file does not exist on the FTP site in either case, the file is created. The following examples show both syntax.

 

// append to an FTP site file named "test"  

SENDFILE "c:\My Data\test" /append

 

// append to an FTP site file named "newtest"  

SENDFILE "c:\My Data\test" /ap "newtest" /timeout=30

 

The /iflarger, /ifnsamesz, /ifnewer, and /ifnotexist options may be used to control if FTP site files are to be overwritten when sent by Robo-FTP. These options are mutually exclusive. When using the /ifnewer option, the determination of the newest file is based on a comparison of the time and date each file was last written to. The file write time comparison is based only on the hour and minute.

 

Important

If a given FTP site is hosted on a Unix system and the server file was last written to six (6) or more months prior to the current date, the comparison is based on the stored month, day, and year - but the server file time is assumed to be 12:00 AM (since the actual time is not available to Robo-FTP for comparison purposes).

 

If you are not using the TIMEZONE script command, you may specify the /tz option with the /ifnewer option to account for differences in timezones between Robo-FTP and the FTP site. This is important for accurate file date and time stamp comparisons. For example, if you are using Robo-FTP in the Central U.S. timezone and the FTP site is located in the Eastern U.S. timezone there is a one-hour difference between the file system times of Robo-FTP’s PC and the FTP site. To allow for this in the SENDFILE command with the /ifnewer option, the command would look like the following which indicates that the FTP site is one hour ahead:

 

SENDFILE "serverfile" /ifnewer /tz=+1

 

Further, if the FTP site is located in the Pacific U.S. timezone there is a two-hour difference the other way between the file system times of Robo-FTP’s PC and the FTP site. To allow for this, the command would look like the following which indicates that the FTP site is two hours behind:

 

SENDFILE "serverfile" /ifnewer /tz=-2

 

The /integrity option enables file integrity checking to be used during the upload.  When using file integrity checking, the checksum is calculated for both the server file and the local file, using the algorithm specified, then these are compared to verify the integrity of the file.  If these do not match then an error is returned.  (NOTE: Not all servers support this option.) The possible algorithm are:

 

none

integrity checking not done

CRC

64-bit hash

MD5

128-bit hash

SHA1

160-bit hash

SHA256

256-bit hash

SHA512

512-bit hash

 

Consider the following example where all files from the current working directory are upload to the server with file integrity checking using the SHA256 algorithm.

 

SENDFILE "*.*" /integrity=SHA256

IFERROR= $ERROR_INTEGRITY_CHECKING_FAILED GOTO integrity_error

 

The /resume and /resumeany options implement the FTP restart (or resume) feature. When this option is specified Robo-FTP assumes that an attempt is being made to resume a broken transfer on the specified file. Robo-FTP attempts to coordinate with the FTP site regarding the size and last modified date of the file to determine if the transfer can be resumed from the point of interruption. If so, only the untransmitted portion of the file is sent and is appended to the incomplete portion currently saved on the FTP site. If Robo-FTP determines that it is not safe to resume a transfer, the SENDFILE command fails if /resume is specified, or the entire file is retransmitted if /resumeany is specified.

 

The /nospaces option causes Robo-FTP to convert space characters found in local folder and file names to underscores before creating corresponding directories on the FTP site and when sending files. This resolves an incompatibility in file naming between Windows and Unix (Unix does not allow spaces in file names). For example, the following command would result in a file named my_test_file.txt being stored on the FTP site.

 

SENDFILE "c:\my test file" /nospaces

 

The /lower and /upper options cause Robo-FTP to convert local folder and file name(s) specified by [ file name ] and [ new file ] to lower or upper case, respectively, before creating corresponding directories on the FTP site and when sending files.

 

The /maxrate option causes Robo-FTP to limit the bandwidth used when uploading a file. The value, specified in Kbps, is an upper limit and the actual throughput will be something less than but close to the value specifed (assuming the connection is capable of sustaining an upload at roughly the rate specified). This option overrides (if the rate specified is non-zero) any global transfer rate for the given FTP site that may may been specifed when the site was defined using the Robo-FTP configurator.

 

The /maxrate option is not available with Robo-FTP’s standard FTP mode. To enable this functionality, select AltFTP mode for non-secure FTP transfers, or one of the SFTP or FTPS modes modes for secure transfers. For example, the limit an upload to 100Kbps, you’d specify the following command.

 

SENDFILE "c:\my test file" /maxrate=100

 

The /serverdate option instructs Robo-FTP to update the last modified date and time of the local file to match the date and time reported by the FTP site for the corresponding file that was just uploaded. The time of the file will be accurate to the minute (the seconds field is not updated). This option permits more accurate synchronization of local files and their counterparts on the FTP site, but should not be used if the original date/time of the local file is signficant.

 

The /localdate option instructs Robo-FTP to update the last modified date and time of the server file to match the date and time of the corresponding local file that was just uploaded. The time of the file will be accurate to the minute (the seconds field is not updated). This option permits more accurate synchronization of server files and their counterparts on the local machine, but should not be used if the original date/time of the server file is signficant.

 

The /blocksize option changes the default read size of the SENDFILE command from 32,000 bytes to the specified value. In the following example, the block size is changed to 64,000 bytes. A higher or lower number may improve throughput performance based on experimentation in your network.

 

SENDFILE "c:\my test file" /blocksize=64000

 

The /type option overrides the default set for a given FTP site. EBCDIC file transfer mode is not permitted unless IBM Host Features mode is enabled.

 

Related Command(s): RCVFILE, SYNC, WORKINGDIR

See also: Using the %nextfile, %nextfolder, and %nextpath Variables, Using the %downloaderrors and %uploaderrors Variables